Viking Shields

Viking Shields

Model I

$145 plus shipping and handling

Stats
Shields are cut from 1/2” plywood which is actually about 7/16” thick. Center boss is 2mm thick. Rim is cut from 26 gauge steel. They are 28” in diameter and weigh about 7 1/2 pounds. Boss and rim are rivited on. Handle is rivited and nailed on.

Shields come with economy boss.

Options
An armstrap is available.

Paint
Shields are available painted, or with just a primer coat. Patterns available are quartered as pictured on Model I or the swirl as on Model III. Colors are black, dark blue, yellow, white, and red.

Stain
The back of the shield can be stained with either a dark red oak as pictured on the Model I, or a ipswich pine as pictured on Model II. The Model III pictured has no stain.

Model II

$175 plus shipping and handling

Very authentic shield. These shields are made of 5 planks of 1/2" plywood. Center boss is hammered out of 13 gauge steel. Boss and handle are rivited and nailed on just like the originals. Rim is made of thick rawhide. They are 28" in diameter and weigh about 7.5 pounds.

Options

A rivited on leather armstrap is available at no extra charge.

Paint
Shields are available painted, or with just a primer coat. Patterns available are quartered as pictured on Model II or the swirl as pictured on Model III. Colors are black, dark blue, yellow, white, and red.

Stain
The back of the shield can be stained with either a dark red oak as pictured on the Model I, or a ipswich pine as pictured above on Model II. The Model III pictured has no stain.

All shields are made to order. Please allow 2-4 weeks for delivery.
Check Unique section for in stock shields.

Click here to view shield Models III & IV